Plug and Play - SpiralTech Hazard Light Adapter on KTM DUKE/RC 200/390 1st Gen. Hazard Light Adapter for KTM Duke/RC 125/200/250/390 32 effects to add Hazard Lights functionality to your KTM It does not require an additional control switch, The Hazards can be activated using the existing KTM indicator console switch.
Patterns can also be selected using the existing Indicator Switch. Salient features: - No Wires Cut, device is plug and play, connects directly into the alarm connector on KTM Duke 125 / 200 / 390 - No Additional Switch required, can be activated/deactivated using the existing indicator switch - Now with over 32 (Thirty Two) user select able Hazard patterns, once selected the pattern is stored in memory - Pattern selection now also possible without opening the seat. -
Completely waterproof design for regular use Safe and easy to install, no warranty issue - Now with 'SMART Switch' Enables selection and cycling of 32 patterns using the indicator switch (Very handy when using on an RC) KTM Duke 200 125 security alarm Connector Alarm Connector Installation instructions: Locate the alarm connector, it is usually hidden behind the fuse holder under the pillion seat. Remove the existing plug on the connector and replace with the Hazard light device. Done! Usage: Turn on the ignition with the ignition key, wait for at least 5 seconds. To enable the hazard turn the indicator to right and let it flash once then disable the indicator. Then quickly turn the indicator to left and then disable it.
The Hazards will now switch on, once the hazard is on press the button on the device marked as a black dot to change between effects. To Switch the Hazard off use the indicators as normal and it will disable the Hazard effect. Installation Videos and more information on our website Note: NOT COMPATIBLE WITH New Duke 125 and Duke 200 ABS.
#SPIRALTECH
#HAZARDLIGHT
#ADAPTER
#PLUGANDPLAY
#KTMDUKERC
#200390
0 Comments